TLD1326ELXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | Automotive, LITIX™ |
| Tolerance | 7% |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| Applications | Automotive |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 3 |
| Max Output Current | 120mA |
| Max Supply Voltage | 40V |
| Output Current | 60mA |
| Max Supply Current | 1.75mA |
| Max Output Voltage | 40V |
| Topology | Boost |
| Min Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 120mA |
| Min Output Voltage | -1V |
| Internal Switch(s) | Yes |
| Screening Level | AEC-Q100 |
| Dimming | PWM |
| Number of Segments | 9 |
| Voltage - Supply (Min) | 5.5V |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 18V |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLD1326ELXUMA1 Overview
There is also a 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package that is used to save space on the board. For the design of these LED drivers, 3 outputs are used.To mount, use Surface Mount.With high efficiency, it appears as a Linear.It is able to work normally at the operating temperature of -40°C~150°C TJ.It provides considerable benefits for Automotive.In this case, the terminations are set to 14.In this LED driver, the base is configured as 14.It is inevitable that there will be undetermined failures when the supply voltage is less than 5.5V.The segment count is 9.It is mounted in the way of Surface Mount.There is no maximum value acceptable for the supply voltage, so 40V is acceptable.A minimal input voltage of 5.5V is required for it to operate.When the supply current should be less than 1.75mA, the device will provide high efficiency.There is no current that can be supplied to the load.LED drivers can deliver all benefits of 120mA due to their maximum output current.LED drivers belonging to the series Automotive, LITIX? are important components in a wide range of applications.There shouldn't be an increase in output voltage over 40V.It maintains a voltage of -1V at its minimum output.
TLD1326ELXUMA1 Features
Available in the 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~150°C TJ
Supply voltage of 18V
TLD1326ELXUMA1 Applications
There are a lot of Infineon Technologies TLD1326ELXUMA1 LED Driver ICs applications.
- Down lights
- A- lamps
- LED Lightings for Industrial Equipment
- Gallery lighting
- Stage Lighting and Signage
- LED backlight driver for LCD displays for portable equipment
- OLED power supply for portable equipment
- Stage and Studio lighting
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
