TLD2310ELXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | Automotive, LITIX™ |
| Tolerance | 7% |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| Applications | Automotive |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 3 |
| Max Output Current | 120mA |
| Max Supply Voltage | 40V |
| Output Current | 60mA |
| Max Supply Current | 1.5mA |
| Max Output Voltage | 40V |
| Topology | Boost |
| Min Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 120mA |
| Min Output Voltage | -1V |
| Internal Switch(s) | Yes |
| Screening Level | AEC-Q100 |
| Number of Segments | 9 |
| Voltage - Supply (Min) | 5.5V |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 18V |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLD2310ELXUMA1 Overview
The 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package conserves board space. There are 3 outputs used for the design of this LED drivers.Surface Mount is used for mounting.With high efficiency, it appears as a Linear.-40°C~150°C TJ is the operating temperature and it works fine.Automotive benefits significantly from the program.A termination of 14 is used to operate the LED driver.There are 14 pins on the base of this LED driver.A voltage supply less than 5.5V will cause undetermined failures.A total of 9 segments are estimated.It has been mounted on Surface Mount.As a maximum value, 40V is acceptable.Initially, it accepts a voltage of 5.5V.When the maximum supply current is below 1.5mA, it is capable of delivering high efficiency.60mA is the maximum current the load can handle.LED drivers can deliver all benefits of 120mA due to their maximum output current.This LED driver belonging to the Automotive, LITIX? series is a key component for a broad range of applications.Voltages above 40V should not be allowed.It maintains a minimum voltage of -1V.
TLD2310ELXUMA1 Features
Available in the 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~150°C TJ
Supply voltage of 18V
TLD2310ELXUMA1 Applications
There are a lot of Infineon Technologies TLD2310ELXUMA1 LED Driver ICs applications.
- Museum lighting
- Architectural lighting
- LED headlights
- Down lights
- General lighting
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for portable equipment
- Stage Lighting and Signage
- Auxiliary lights for on-vehicle cameras
- Dimmable LED for vehicle interiors
