TLD2326ELXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, LITIX™ |
| Tolerance | 7% |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| Applications | Automotive |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 3 |
| Max Output Current | 120mA |
| Max Supply Voltage | 40V |
| Output Current | 60mA |
| Max Supply Current | 1.75mA |
| Max Output Voltage | 40V |
| Topology | Boost |
| Min Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 120mA |
| Min Output Voltage | -1V |
| Internal Switch(s) | Yes |
| Screening Level | AEC-Q100 |
| Number of Segments | 30 |
| Voltage - Supply (Min) | 5.5V |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 18V |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLD2326ELXUMA1 Overview
Using its 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package, it is possible to save board space. LED drivers have a total of 3 outputs that are used in the design of the drivers.It is possible to mount the led driver using Surface Mount.As a Linear, it has high efficiency and reliability.This LED driver can be operated at a temperature of -40°C~150°C TJ. The benefits are considerable for Automotive.The terminations 14 are designed for its operation.The LED light driver is configured with a base of 0 pins.Failures may occur if the voltage supply is below 5.5V.There are 30 segments.It is mounted in the way of Surface Mount.The supply voltage of 40V is an acceptable maximum value.With 5.5V as the minimal input voltage, it operates.It is capable of delivering high efficiency when the maximal supply current is below 1.75mA.The current that can be supplied to the load is 60mA.LED drivers deliver all their benefits with a maximum output current of 120mA.There are many applications for this LED driver belonging to the Automotive, LITIX? series.Voltages should not exceed 40V volts at the output.The minimal voltage it outputs maintains at -1V.
TLD2326ELXUMA1 Features
Available in the 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~150°C TJ
Supply voltage of 18V
TLD2326ELXUMA1 Applications
There are a lot of Infineon Technologies TLD2326ELXUMA1 LED Driver ICs applications.
- High-end retail lighting
- Dimmable LED for vehicle interiors
- Auxiliary lights for on-vehicle cameras
- Down lighting
- Industrial LED Lighting: Image Recognition Devices
- Refrigeration lighting
- Flicker-free LED Lighting using R1580N
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
