TLD5045EJXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC, LITIX™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin (Sn) |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 50kHz~300kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLD5045 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 36V |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 8V |
| Output Current | 700mA |
| Topology | Step-Down (Buck) |
| Halogen Free | Halogen Free |
| Output Current per Channel | 700mA |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 2 |
| Voltage - Supply (Min) | 5V |
| Multiplexed Display Capability | NO |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLD5045EJXUMA1 Overview
The 8-SOIC (0.154, 3.90mm Width) Exposed Pad package is used for saving board space. A LED driver using this design has 1 outputs.For mounting, it uses the Surface Mount method.When it emerges as a DC DC Regulator, it shows high-performance and reliability.It is possible for the led driver ic to function normally at -40°C~150°C TJ.The benefits of Backlight are considerable.Frequency 50kHz~300kHz is the basis of operation.It operates with terminations of 8.The configuration of the board is built around 8 pins.Failures may occur if the voltage supply is below 5V.In total, it includes 2 segments.It's mounted in Surface Mount.The LED driver can be found under the base part number TLD5045.Ideally, the supply voltage should be 40V.There are 8 pins on this device.For highest efficiency, it works with a minimal supply voltage of 8V.The current that can be supplied to the load is 700mA.Powering systems requires 36V voltages.An LED driver belonging to the Automotive, AEC, LITIX? series is an essential component in a wide range of applications.
TLD5045EJXUMA1 Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~150°C TJ
Frequency of 50kHz~300kHz
Supply voltage of 12V
Operating with the supply voltage of 36V
TLD5045EJXUMA1 Applications
There are a lot of Infineon Technologies TLD5045EJXUMA1 LED Driver ICs applications.
- Museum lighting
- Portable lighting
- Medical surgery lighting
- High-end retail lighting
- Dimmable LED for vehicle interiors
- Down lights
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Constant Voltage Power Source for portable equipment
- Amusement Machines
- A- lamps
