TLD5095ELXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC, LITIX™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Tin (Sn) |
| Applications | Automotive |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~500kHz |
| Base Part Number | TLD5095 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 6V |
| Input Voltage (Min) | 4.75V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.09A |
| Input Voltage (Max) | 45V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Dimming | PWM |
| Voltage - Supply (Max) | 45V |
| Voltage - Supply (Min) | 4.75V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
TLD5095ELXUMA1 Overview
The 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package conserves board space. LED drivers design with 1 outputs.Mounting is done according to the Surface Mount method.As a result, it appears as a DC DC Controller with a high efficiency and a high degree of reliability.It is possible for the led light driver to operate at a temperature of -40°C~150°C TJ.The benefits of Automotive are considerable.On the basis of the frequency 100kHz~500kHz, it operates.In this case, the terminations are set to 14.It is likely that undetermined failures will occur if the voltage supply is less than 4.75V.This LED driver has the part number TLD5095.This device contains 14 pins.As a result, it is designed to be able to deliver a maximum voltage of 45V.A component of the Automotive, AEC, LITIX? series, this LED driver is widely used in a variety of applications.A circuit operated by the device has 6V volts.The device operates much more conveniently when the input voltage exceeds or equals 4.75V.The LED driver is further characterized by a ALSO OPERATES AS LDO REGULATOR.The input voltage should be kept below 45V to ensure high stability.It should not exceed 0.09A in terms of output current.
TLD5095ELXUMA1 Features
Available in the 14-LSSOP (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~150°C TJ
Frequency of 100kHz~500kHz
ALSO OPERATES AS LDO REGULATOR
TLD5095ELXUMA1 Applications
There are a lot of Infineon Technologies TLD5095ELXUMA1 LED Driver ICs applications.
- High-end retail lighting
- OLED power supply for portable equipment
- LED backlight driver for LCD displays for portable equipment
- Architectural lighting
- Dimmable LED for vehicle interiors
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lights
- General lighting
- Other Electronic Devices
- Portable lighting
