Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
Excalibur™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
Base Part Number |
TLE2021 |
Pin Count |
8 |
Operating Supply Voltage |
20V |
Power Supplies |
+-2/+-20/4/40V |
Number of Circuits |
1 |
Operating Supply Current |
240μA |
Nominal Supply Current |
300μA |
Slew Rate |
0.65V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
85 dB |
Current - Input Bias |
25nA |
Voltage - Supply, Single/Dual (±) |
4V~40V ±2V~20V |
Output Current per Channel |
20mA |
Input Offset Voltage (Vos) |
80μV |
Bandwidth |
1.2MHz |
Gain Bandwidth Product |
1.7MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
1700 kHz |
Voltage Gain |
123.52dB |
Average Bias Current-Max (IIB) |
0.07μA |
Low-Offset |
YES |
Frequency Compensation |
YES |
Low-Bias |
NO |
Micropower |
YES |
Max Frequency |
1kHz |
Bias Current-Max (IIB) @25C |
0.07μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.2MHz |
Max I/O Voltage |
300μV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.006μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLE2021AIP Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 80μV. Through Hole is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 240μA . Voltage gain should remain at 123.52dB. The buffer amp consists of 1 circuits in total. The operating supply voltage of the buffer op amp is rated at 20V. Instrumentation amplifiers are numbered by their Excalibur? series.
TLE2021AIP Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2021AIP Applications
There are a lot of Texas Instruments TLE2021AIP Instrumentational OP Amps applications.
- RF cable systems
- MP3
- Portable media players
- Automatic control
- Radiation thermometry transducers
- Comparator
- Band-pass filter
- Gaming industry
- single/dual op amp sum and difference circuits
- Fast A/D and D/A converters