TLE2021CP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLE2021 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Power Supplies | +-2/+-20/4/40V |
| Number of Channels | 1 |
| Operating Supply Current | 240μA |
| Nominal Supply Current | 300μA |
| Power Dissipation | 1W |
| Slew Rate | 0.65V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 25nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 1.2MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.2MHz |
| Max I/O Voltage | 600μV |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2021CP Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 600μV. This electrical part should be mounted using type Through Hole. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 240μA . 123.52dB should remain the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 20V. Excalibur? corresponds to the op amp's series.
TLE2021CP Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2021CP Applications
There are a lot of Texas Instruments TLE2021CP Instrumentational OP Amps applications.
- Logarithmic operation circuits
- PDA
- Automatic control
- Commercial audio systems
- Hand-held batteries
- High/low-pass filter circuit
- Scintillation detectors
- Biopotential
- single/dual op amp sum and difference circuits
- Gaming industry
