banner_page

TLE2021MDG4

20mA per Channel 25nA 85 dB Instrumentational OP Amps 0.07μA 20V 4V~40V ±2V~20V TLE2021 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLE2021MDG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 423
  • Description: 20mA per Channel 25nA 85 dB Instrumentational OP Amps 0.07μA 20V 4V~40V ±2V~20V TLE2021 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tube
Series Excalibur™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Base Part Number TLE2021
Pin Count 8
Operating Supply Voltage 20V
Number of Elements 1
Power Supplies +-2/+-20/4/40V
Operating Supply Current 200μA
Nominal Supply Current 300μA
Power Dissipation 725mW
Slew Rate 0.65V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 85 dB
Current - Input Bias 25nA
Voltage - Supply, Single/Dual (±) 4V~40V ±2V~20V
Output Current per Channel 20mA
Input Offset Voltage (Vos) 600μV
Gain Bandwidth Product 2MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 1700 kHz
Voltage Gain 123.52dB
Average Bias Current-Max (IIB) 0.07μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 120μV
Low-Bias NO
Micropower YES
Bias Current-Max (IIB) @25C 0.07μA
Programmable Power NO
Nominal Gain Bandwidth Product 1.2MHz
Max I/O Voltage 600μV
Wideband NO
Input Offset Current-Max (IIO) 0.006μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLE2021MDG4 Overview


In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. There is an input offset voltage of 600μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -55°C~125°C as far as operating temperature is concerned. Using a supply current of 200μA , this buffer op amp will be able to operate. There should be no change in the voltage gain. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 20V voltage. It is used TR to pack the op amps. Buffer op amp series numbers are indicated by the Excalibur?.

TLE2021MDG4 Features


8 Pins
supply voltage of 15V
123.52dB voltage gain

TLE2021MDG4 Applications


There are a lot of Texas Instruments TLE2021MDG4 Instrumentational OP Amps applications.

  • Test equipment
  • Division circuits
  • High input resistance broadband
  • Communication
  • Measurements of Wheatstone bridge
  • Inverse/same-phase proportional circuit
  • Cinema or auditorium audio system
  • Professional videography
  • Gaming industry
  • Video computer boards

Write a review

Note: HTML is not translated!
    Bad           Good