TLE2022AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TLE2022 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Channels | 2 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 725mW |
| Slew Rate | 0.65V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 87 dB |
| Current - Input Bias | 33nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 2.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 120μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 400μV |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2022AIDR Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called General Purpose-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 400μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. A supply current of 550μA can be used to operate this linear amplifier. There should be no change in the voltage gain. Op amp ic has 2 channels. The operating supply voltage of the buffer op amp is rated at 20V. The linear amplifier is packaged by using a TR axis. As the name implies, Excalibur? refers to the series of the buffer op amp.
TLE2022AIDR Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2022AIDR Applications
There are a lot of Texas Instruments TLE2022AIDR Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Precision measurement
- High gain DC amplifier
- Gaming industry
- Industrial applications including automation
- Integrator circuits
- Signal amplification
- Weak signal detection
- Home audio systems
- Navigation
