TLE2022AIP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TLE2022 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Elements | 2 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 1W |
| Slew Rate | 0.65V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 87 dB |
| Current - Input Bias | 33nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 1.7MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 120μV |
| Low-Bias | NO |
| Micropower | YES |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 400μV |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2022AIP Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 400μV. This electronic part is best mounted with type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . You can run this op amp ic on 550μA . You should keep the voltage gain at 123.52dB for the time being. The linear amplifier consists of 2 different elements in total. The operating supply voltage of instrumentation amplifier is rated 20V voltage. The Excalibur? indicates the series number of the op amp.
TLE2022AIP Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2022AIP Applications
There are a lot of Texas Instruments TLE2022AIP Instrumentational OP Amps applications.
- Car stereo
- Addition operation circuits
- Thermocouples
- Measurements of Wheatstone bridge
- Comparator
- Precision measurement
- E-book readers
- Signal amplification
- Professional videography
- Blood pressure sensors
