TLE2022AQDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TLE2022 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Elements | 2 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 700μA |
| Slew Rate | 0.65V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 87 dB |
| Current - Input Bias | 33nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 1.7MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 120μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 400μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2022AQDREP Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 400μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 550μA and 10 . Maintain 123.52dB as the voltage gain. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of instrumentation amplifier is rated 20V voltage. The linear amplifier is packaged by using a TR axis. Excalibur? corresponds to linear amplifier's series.
TLE2022AQDREP Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2022AQDREP Applications
There are a lot of Texas Instruments TLE2022AQDREP Instrumentational OP Amps applications.
- Television broadcasting equipment
- Proportional counter tubes
- Instrumentation
- Power transmission
- E-book readers
- High speed sample
- High input resistance broadband
- Differentiator circuits
- Navigation
- Video data acquisition
