TLE2022MD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TLE2022 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Elements | 2 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 725mW |
| Slew Rate | 0.65V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 35nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 1.2MHz |
| Gain Bandwidth Product | 2.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 600μV |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2022MD Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 600μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -55°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 550μA and 10 . It is recommended to keep the voltage gain at 123.52dB at all times. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 20V voltage. An buffer amplifier is packed in a TR-shape according to the design. As the name implies, Excalibur? refers to the series of the buffer op amp.
TLE2022MD Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2022MD Applications
There are a lot of Texas Instruments TLE2022MD Instrumentational OP Amps applications.
- Power control
- Communication device
- Subtraction operation circuits
- Medical imaging
- Test equipment
- Proportional operation circuits
- Automation control systems
- High speed sample
- Information processing
- Strain gauges
