Parameters |
Packaging |
Tube |
Series |
Excalibur™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Base Part Number |
TLE2022 |
Pin Count |
8 |
Operating Supply Voltage |
20V |
Number of Circuits |
2 |
Operating Supply Current |
550μA |
Nominal Supply Current |
300μA |
Slew Rate |
0.65V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
85 dB |
Current - Input Bias |
35nA |
Voltage - Supply, Single/Dual (±) |
4V~40V ±2V~20V |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
150μV |
Bandwidth |
1.7MHz |
Gain Bandwidth Product |
2.8MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
1700 kHz |
Voltage Gain |
123.52dB |
Average Bias Current-Max (IIB) |
0.07μA |
Low-Offset |
YES |
Frequency Compensation |
YES |
Low-Bias |
NO |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.07μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.7MHz |
Max I/O Voltage |
600μV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C |
TLE2022MDG4 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 8. The total number of pins on linear amplifier is 8. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -55°C~125°C. Operational amplifier can operate supply current at 550μA. You should keep the voltage gain at 123.52dB for the time being. During the manufacturing process, this buffer amplifier is divided into 2 circuits. The operating supply voltage of the buffer op amp is rated at 20V. The linear amplifier is packaged by using a TR axis. Buffer op amp series numbers are indicated by the Excalibur?.
TLE2022MDG4 Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2022MDG4 Applications
There are a lot of Texas Instruments TLE2022MDG4 Instrumentational OP Amps applications.
- PDA
- Test and measurement instruments
- Instrumentation
- Weak signal detection
- Radar
- Measurements of Wheatstone bridge
- Mobile phone
- Precision measurement
- Home audio systems
- High-frequency data acquisition systems