TLE2022QDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TLE2022 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Elements | 2 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 300μA |
| Slew Rate | 0.65V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 35nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 600μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2022QDRG4Q1 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 600μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 550μA and 10 . The voltage gain should stay at 123.52dB. A total of 2 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 20V voltage. As a result of this, the buffer amplifier is packed in TR. Buffer op amp series numbers are indicated by the Automotive, AEC-Q100, Excalibur?.
TLE2022QDRG4Q1 Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2022QDRG4Q1 Applications
There are a lot of Texas Instruments TLE2022QDRG4Q1 Instrumentational OP Amps applications.
- High gain DC amplifier
- PDA
- Voltage regulation circuit
- High speed sample
- Wireless base stations
- Automation control systems
- Tablets
- Video conversion and routing
- Gaming industry
- Power generator
