TLE2024ACDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2024 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Number of Channels | 4 |
| Operating Supply Current | 1.05mA |
| Nominal Supply Current | 1.4mA |
| Power Dissipation | 1.025W |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 850μV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 750μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 850μV |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2024ACDW Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 16h termination of the year. It consists of a total of 16 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 16 pins. There is an input offset voltage of 850μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . You can run this op amp ic on 1.05mA . You should keep the voltage gain at 123.52dB for the time being. 4 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 20V. In this case, Excalibur? represents the instrumentation amplifiers' series number.
TLE2024ACDW Features
16 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2024ACDW Applications
There are a lot of Texas Instruments TLE2024ACDW Instrumentational OP Amps applications.
- Ultrasound transducers
- Exponential operation circuits
- Laptop
- Car stereo
- Oscilloscopes
- Proportional operation circuits
- Differentiator circuits
- Digital cameras
- Video conversion and routing
- Communication
