TLE2024AIDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.025W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2024 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Number of Elements | 4 |
| Operating Supply Current | 1.05mA |
| Nominal Supply Current | 1.4mA |
| Power Dissipation | 1.025W |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 850μV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 750μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 850μV |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2024AIDW Overview
It is packaged in an 16-SOIC (0.295, 7.50mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tube case. There have been a total of 16 terminations over the past year. In total, there are 16 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 16 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 850μV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 1.05mA . There should be no change in the voltage gain at 123.52dB. This linear amplifier has a total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 20V voltage. Excalibur? is the number that corresponds to the series of the buffer op amp.
TLE2024AIDW Features
16 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2024AIDW Applications
There are a lot of Texas Instruments TLE2024AIDW Instrumentational OP Amps applications.
- Communication
- Automation control systems
- Strain gauges
- Band-pass filter
- Radar
- Weighing systems
- High gain DC amplifier
- Signal filtering
- High input resistance broadband
- Video amplifiers
