TLE2024BMDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2024 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Number of Channels | 4 |
| Operating Supply Current | 1.05mA |
| Nominal Supply Current | 1.4mA |
| Power Dissipation | 1.025W |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 600μV |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2024BMDW Overview
The linear amplifier is packaged in a 16-SOIC (0.295, 7.50mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 16 terminations this year. The pins on this board total to 16 in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 16-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 600μV voltage. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . Using a supply current of 1.05mA , this buffer op amp will be able to operate. Maintain 123.52dB as the voltage gain. 4 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 20V voltage. This buffer amplifier is assigned within the Excalibur? series by its manufacturer.
TLE2024BMDW Features
16 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2024BMDW Applications
There are a lot of Texas Instruments TLE2024BMDW Instrumentational OP Amps applications.
- Digital cameras
- Micro signal measurement
- Medical imaging
- High gain DC amplifier
- Measurements of Wheatstone bridge
- Band-pass filter
- earphone
- pH (acidity)
- Oscilloscopes
- Voltage regulation circuit
