TLE2024BMJB
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Package / Case | CDIP |
| Surface Mount | NO |
| Number of Pins | 14 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.33.00.01 |
| Subcategory | Operational Amplifier |
| Packing Method | TUBE |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 14 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 4V |
| Supply Current-Max | 1.2mA |
| Slew Rate | 0.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 70nA |
| Gain Bandwidth Product | 1.7MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2800 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.09μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 20V |
| Low-Bias | NO |
| Micropower | YES |
| Min Dual Supply Voltage | 2V |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Screening Level | 38535Q/M;38534H;883B |
| Max I/O Voltage | 600μV |
| Input Offset Voltage-Max | 700μV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.67mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLE2024BMJB Overview
Op amp is packaged in CDIP case. This is a OPERATIONAL AMPLIFIER type op amp. A total of 14 terminations have been reported in the past few weeks. In this case, there are 14 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. There should be no change in the voltage gain at 123.52dB. This instrumentation amplifier cannot operate below -55°C degrees Celsius. No temperature greater than 125°C should be used. It is used TUBE to pack the op amps. I would like to point out that this electrical component is capable of working from a voltage below 40V as far as the power supply is concerned. In order to ensure that the instrumentation amplifier's supply voltage remains above 4V, it is recommended to keep it higher. You should conduct this electronic component under the dual supply voltage of 20V.
TLE2024BMJB Features
14 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2024BMJB Applications
There are a lot of Texas Instruments TLE2024BMJB Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Thermocouples
- Wireless base stations
- Instrumentation
- Exponential operation circuits
- Weighing systems
- Band-pass filter
- Digital cameras
- Large motor controllers
- High gain DC amplifier
