TLE2024MDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2024 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Number of Elements | 4 |
| Operating Supply Current | 1.05mA |
| Nominal Supply Current | 1.4mA |
| Power Dissipation | 1.025W |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1.1mV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.09μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2024MDW Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 16 terminations. Linear amplifier has a total of 16 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 16 pins on it. Regarding input offset voltage, op amp rates 1.1mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -55°C~125°C. It is possible to operate this buffer amplifier from a supply current of 1.05mA . Op amp is a member of the 123.52dB's 123.52dB family. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of the buffer op amp is rated at 20V. Instrumentation amplifiers are numbered by their Excalibur? series.
TLE2024MDW Features
16 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2024MDW Applications
There are a lot of Texas Instruments TLE2024MDW Instrumentational OP Amps applications.
- Power generator
- pH (acidity)
- Weighing systems
- Strain gauges
- Blood pressure sensors
- Power control
- Micro signal measurement
- MP3
- Gaming industry
- Subtraction operation circuits
