TLE2024MDWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2024 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.05mA |
| Nominal Supply Current | 1.2mA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 2.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.09μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 1.1mV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2024MDWG4 Overview
There is a 16-SOIC (0.295, 7.50mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 16 terminations. A total of 16 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 16 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -55°C~125°C. This op amp can operate from a supply current at 1.05mA. It is recommended to keep the voltage gain at 123.52dB at all times. During the manufacturing process, this buffer amplifier is divided into 4 circuits. The operating supply voltage of instrumentation amplifier is rated 20V voltage. An buffer amplifier is packed in a TR-shape according to the design. This buffer amplifier is assigned within the Excalibur? series by its manufacturer.
TLE2024MDWG4 Features
16 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2024MDWG4 Applications
There are a lot of Texas Instruments TLE2024MDWG4 Instrumentational OP Amps applications.
- Television
- Industrial applications including automation
- Voltage regulation circuit
- Inverse/same-phase proportional circuit
- Differentiator circuits
- MP3
- Radar
- Blood pressure sensors
- Broadcasting
- Power transmission
