Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
Excalibur™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Base Part Number |
TLE2027 |
Pin Count |
8 |
Operating Supply Voltage |
19V |
Number of Channels |
1 |
Operating Supply Current |
3.8mA |
Nominal Supply Current |
5.3mA |
Power Dissipation |
725mW |
Slew Rate |
2.8V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
100 dB |
Current - Input Bias |
15nA |
Voltage - Supply, Single/Dual (±) |
8V~38V ±4V~19V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
100μV |
Bandwidth |
13MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
13000 kHz |
Voltage Gain |
153.06dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Voltage - Input Offset |
20μV |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.09μA |
Programmable Power |
NO |
Dual Supply Voltage |
9V |
Nominal Gain Bandwidth Product |
13MHz |
Max I/O Voltage |
100μV |
Input Offset Current-Max (IIO) |
0.09μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLE2027CD Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . A supply current of 3.8mA can be used to operate this linear amplifier. 153.06dB should be the voltage gain. The op amp ic has 1 channels on it. The operating supply voltage of the buffer op amp is rated at 19V. Excalibur? corresponds to linear amplifier's series.
TLE2027CD Features
8 Pins
supply voltage of 15V
153.06dB voltage gain
TLE2027CD Applications
There are a lot of Texas Instruments TLE2027CD Instrumentational OP Amps applications.
- Signal operation
- Vehicle electronics
- Portable docking station
- Video amplifiers
- Signal amplification
- Fission chambers
- Car stereo
- Portable electronic products powered by batteries
- Integrator circuits
- Switching amplifier