TLE2027CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2027 |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Number of Elements | 1 |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 5.3mA |
| Power Dissipation | 725mW |
| Slew Rate | 2.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 8V~38V ±4V~19V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 13MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 13000 kHz |
| Voltage Gain | 153.06dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 20μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 13MHz |
| Max I/O Voltage | 100μV |
| Input Offset Current-Max (IIO) | 0.09μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2027CDR Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. There is an input offset voltage of 100μV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. You can run this op amp ic on 3.8mA . You should keep the voltage gain at 153.06dB for the time being. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 19V. As a result of this, the buffer amplifier is packed in TR. The Excalibur? stands for the buffer op amp's serial number.
TLE2027CDR Features
8 Pins
supply voltage of 15V
153.06dB voltage gain
TLE2027CDR Applications
There are a lot of Texas Instruments TLE2027CDR Instrumentational OP Amps applications.
- Weak signal detection
- Video data acquisition
- Broadcasting
- High-frequency data acquisition systems
- Automotive sensors
- High/low-pass filter circuit
- Weighing systems
- Television broadcasting equipment
- Signal operation
- Blood pressure sensors
