TLE2027MDREP
| Parameters | |
|---|---|
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2027 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 5.3mA |
| Power Dissipation | 725mW |
| Slew Rate | 2.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 8V~38V ±4V~19V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 13MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 13000 kHz |
| Voltage Gain | 153.06dB |
| Average Bias Current-Max (IIB) | 0.09μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 20μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 13MHz |
| Max I/O Voltage | 100μV |
| Input Offset Current-Max (IIO) | 0.09μA |
| Height | 1.75mm |
| Length | 4.9mm |
TLE2027MDREP Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 8 pins. In terms of input offset voltage, operational amplifier rates 100μV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at -55°C~125°C. Using an 3.8mA supply current, this operational amplifier ics can be operated. 153.06dB should remain the voltage gain. There are 1 elements in total in this linear amplifier. The instrumentation amplifier is packed in the form of TR. Buffer op amp series numbers are indicated by the Excalibur?.
TLE2027MDREP Features
8 Pins
supply voltage of 15V
153.06dB voltage gain
TLE2027MDREP Applications
There are a lot of Texas Instruments TLE2027MDREP Instrumentational OP Amps applications.
- Digital cameras
- MP3
- Portable media players
- earphone
- Fission chambers
- High-frequency data acquisition systems
- Band-stop filter
- Biopotential
- Logarithmic operation circuits
- Power control
