TLE2037AQDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2037 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 5.3mA |
| Slew Rate | 7.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 117 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 8V~38V ±4V~19V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 153.06dB |
| Average Bias Current-Max (IIB) | 0.09μA |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 50MHz |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.09μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2037AQDRQ1 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 10μV voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 3.8mA and 10 . The voltage gain should stay at 153.06dB. A instrumentation amplifier like this has 1 circuits. The linear amplifier is packaged by using a TR axis. In this case, Automotive, AEC-Q100, Excalibur? represents the instrumentation amplifiers' series number.
TLE2037AQDRQ1 Features
8 Pins
supply voltage of 15V
153.06dB voltage gain
TLE2037AQDRQ1 Applications
There are a lot of Texas Instruments TLE2037AQDRQ1 Instrumentational OP Amps applications.
- Band-stop filter
- Vehicle electronics
- Car stereo
- Thermocouples
- single/dual op amp sum and difference circuits
- Blood pressure sensors
- Band-pass filter
- Non-polarized electrodes
- Fission chambers
- Signal operation
