TLE2061ACD
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLE2061 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 290μA |
| Nominal Supply Current | 350μA |
| Slew Rate | 3.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2.6mV |
| Bandwidth | 1.8MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 98.06dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Max I/O Voltage | 2.6mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
TLE2061ACD Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp of this type is a J-FET-type. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 8-pin op amp ic is included in the package. The input offset voltage is 2.6mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. This op amp can operate from a supply current at 290μA. Voltage gain should remain at 98.06dB. The op amp ic has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The Excalibur? indicates the series number of the op amp.
TLE2061ACD Features
8 Pins
supply voltage of 5V
98.06dB voltage gain
TLE2061ACD Applications
There are a lot of Texas Instruments TLE2061ACD Instrumentational OP Amps applications.
- Fission chambers
- Weak signal detection
- single/dual op amp sum and difference circuits
- Communication device
- Power generator
- Weighing systems
- High gain DC amplifier
- ECG equipment
- Radar
- Fast A/D and D/A converters
