TLE2061AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLE2061 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 290μA |
| Nominal Supply Current | 350μA |
| Max Supply Current | 325μA |
| Slew Rate | 3.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2.6mV |
| Bandwidth | 1.8MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 98.06dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Max I/O Voltage | 2.6mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.003μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2061AID Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Buffer amps of this type are called J-FET-types. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 2.6mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . You can run this op amp ic on 290μA . 98.06dB should remain the voltage gain. Op amp ic has 1 channels. The operating supply voltage of the buffer op amp is rated at 18V. The Excalibur? indicates the series number of the op amp.
TLE2061AID Features
8 Pins
supply voltage of 5V
98.06dB voltage gain
TLE2061AID Applications
There are a lot of Texas Instruments TLE2061AID Instrumentational OP Amps applications.
- Broadcasting
- Blood pressure sensors
- Professional videography
- Power transmission
- Industrial control system
- Power control
- Radar
- Fission chambers
- pH (acidity)
- Instrumentation
