TLE2062AMD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLE2062 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 625μA |
| Nominal Supply Current | 690μA |
| Max Supply Current | 620μA |
| Slew Rate | 3.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 1.8MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 800μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.015μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2062AMD Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called J-FET-types. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 8 pins. The input offset voltage is 4mV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -55°C~125°C when it comes to operating temperatureUsing an 625μA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 93.06dB is the best course of action. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. Buffer op amp series numbers are indicated by the Excalibur?.
TLE2062AMD Features
8 Pins
supply voltage of 5V
93.06dB voltage gain
TLE2062AMD Applications
There are a lot of Texas Instruments TLE2062AMD Instrumentational OP Amps applications.
- Signal amplification
- Video data acquisition
- Commercial audio systems
- Precision measurement
- Portable media players
- Thermocouples
- Gaming industry
- Multimedia playback equipment
- Power transmission
- High speed sample
