TLE2062CDR

2 Channels 80mA per Channel 4pA 65 dB Instrumentational OP Amps 0.00006μA 18V 7V~36V ±3.5V~18V TLE2062 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLE2062CDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 552
Description: 2 Channels 80mA per Channel 4pA 65 dB Instrumentational OP Amps 0.00006μA 18V 7V~36V ±3.5V~18V TLE2062 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Slew Rate	3.4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	65 dB
Current - Input Bias	4pA
Voltage - Supply, Single/Dual (±)	7V~36V ±3.5V~18V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	5mV
Bandwidth	1.8MHz
Gain Bandwidth Product	2MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	2000 kHz
Voltage Gain	98.06dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	19V
Voltage - Input Offset	900μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.000003μA
Programmable Power	NO
Nominal Gain Bandwidth Product	1.8MHz
Max I/O Voltage	5mV
Power	NO
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Cut Tape (CT)
Series	Excalibur™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIFET
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLE2062
Pin Count	8
Operating Supply Voltage	18V
Number of Channels	2
Operating Supply Current	625μA
Nominal Supply Current	690μA

TLE2062CDR Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. J-FET-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Cut Tape (CT) case. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 625μA . Voltage gain should remain at 98.06dB. Instrumentation amplifier has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 18V. As a result of this, the buffer amplifier is packed in TR. The Excalibur? indicates the series number of the op amp.