TLE2062IDR
| Parameters | |
|---|---|
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 19V |
| Voltage - Input Offset | 900μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -19V |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Max I/O Voltage | 5mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLE2062 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 625μA |
| Nominal Supply Current | 690μA |
| Slew Rate | 3.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1.8MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 98.06dB |
TLE2062IDR Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. A J-FET-type buffer amplifier is shown here. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are located on the operational amplifiers. The input offset voltage is 5mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 625μA . There should be no change in the voltage gain. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. It is used TR to pack the op amps. The Excalibur? represents the op amp's series number.
TLE2062IDR Features
8 Pins
supply voltage of 5V
98.06dB voltage gain
TLE2062IDR Applications
There are a lot of Texas Instruments TLE2062IDR Instrumentational OP Amps applications.
- Computer workstations
- Thermocouples
- Subtraction operation circuits
- Home audio systems
- Signal amplification
- Scintillation detectors
- Car stereo
- Portable electronic products powered by batteries
- Video conversion and routing
- Strain gauges
