TLE2062MD

80mA per Channel 4pA 65 dB Instrumentational OP Amps 0.00006μA 18V 7V~36V ±3.5V~18V TLE2062 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLE2062MD
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 646
Description: 80mA per Channel 4pA 65 dB Instrumentational OP Amps 0.00006μA 18V 7V~36V ±3.5V~18V TLE2062 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Frequency Compensation	YES
Supply Voltage Limit-Max	19V
Voltage - Input Offset	900μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.000003μA
Programmable Power	NO
Nominal Gain Bandwidth Product	1.8MHz
Max I/O Voltage	5mV
Power	NO
Input Offset Current-Max (IIO)	0.015μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-55°C~125°C
Packaging	Tube
Series	Excalibur™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIFET
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLE2062
Pin Count	8
Operating Supply Voltage	18V
Number of Elements	2
Operating Supply Current	625μA
Nominal Supply Current	690μA
Max Supply Current	620μA
Slew Rate	3.4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	65 dB
Current - Input Bias	4pA
Voltage - Supply, Single/Dual (±)	7V~36V ±3.5V~18V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	5mV
Bandwidth	1.8MHz
Gain Bandwidth Product	2MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	2000 kHz
Voltage Gain	93.06dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO

TLE2062MD Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp of this type is a J-FET-type. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. There is an input offset voltage of 5mV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -55°C~125°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 625μA . There should be no change in the voltage gain at 93.06dB. Op amp has total of 2 elements. The operating supply voltage of the buffer op amp is rated at 18V. The Excalibur? represents the op amp's series number.