Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
Excalibur™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIFET |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLE2064 |
Pin Count |
14 |
Operating Supply Voltage |
18V |
Power Supplies |
+-3.5/+-18/7/36V |
Number of Channels |
4 |
Operating Supply Current |
1.25mA |
Nominal Supply Current |
1.4mA |
Max Supply Current |
1.3mA |
Slew Rate |
3.4V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
4pA |
Voltage - Supply, Single/Dual (±) |
7V~36V ±3.5V~18V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
6mV |
Bandwidth |
1.8MHz |
Gain Bandwidth Product |
2MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
2000 kHz |
Voltage Gain |
98.06dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
900μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.000003μA |
Programmable Power |
NO |
Dual Supply Voltage |
9V |
Nominal Gain Bandwidth Product |
1.8MHz |
Max I/O Voltage |
6mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.0008μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLE2064ACD Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the J-FET-type. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 14 terminations this year. Buffer amplifier has a total of 14 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 6mV. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 1.25mA and 10 . It is recommended to keep the voltage gain at 98.06dB at all times. Instrumentation amplifier has 4 channels on it. The operating supply voltage of the buffer op amp is rated at 18V. Instrumentation amplifiers are numbered by their Excalibur? series.
TLE2064ACD Features
14 Pins
supply voltage of 5V
98.06dB voltage gain
TLE2064ACD Applications
There are a lot of Texas Instruments TLE2064ACD Instrumentational OP Amps applications.
- Video data acquisition
- Industrial control system
- Biopotential
- Vehicle electronics
- Signal transformation
- Blood pressure sensors
- Semiconductor detectors
- Industrial applications including automation
- Comparator
- Communication