TLE2064AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2064 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-3.5/+-18/7/36V |
| Number of Channels | 4 |
| Operating Supply Current | 1.25mA |
| Nominal Supply Current | 1.4mA |
| Slew Rate | 3.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 1.8MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 98.06dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 900μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.002μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2064AID Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Op amps are J-FET types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 14 terminations. It consists of a total of 14 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 14 pins. Op amp rates 6mV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 1.25mA . Keeping the voltage gain at 98.06dB is the best course of action. Buffer op amp is equipped with 4 channels on the device. The operating supply voltage of the buffer op amp is rated at 18V. As the name implies, Excalibur? refers to the series of the buffer op amp.
TLE2064AID Features
14 Pins
supply voltage of 5V
98.06dB voltage gain
TLE2064AID Applications
There are a lot of Texas Instruments TLE2064AID Instrumentational OP Amps applications.
- Communication device
- ECG equipment
- Semiconductor detectors
- pH (acidity)
- Gaming industry
- Medical instruments
- Car stereo
- Proportional operation circuits
- Blood pressure sensors
- Voltage regulation circuit
