TLE2064CDRG4
| Parameters | |
|---|---|
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 19V |
| Voltage - Input Offset | 900μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -19V |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Max I/O Voltage | 7mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0008μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2064 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | +-3.5/+-18/7/36V |
| Operating Supply Current | 1.25mA |
| Nominal Supply Current | 1.4mA |
| Slew Rate | 3.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1.8MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 98.06dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
TLE2064CDRG4 Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. An op amp ic of the J-FET type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 14 mark. There are a total of 14 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 7mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.25mA and 10 . The voltage gain should stay at 98.06dB. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. The instrumentation amplifier is packed in the form of TR. The Excalibur? represents the op amp's series number.
TLE2064CDRG4 Features
14 Pins
supply voltage of 5V
98.06dB voltage gain
TLE2064CDRG4 Applications
There are a lot of Texas Instruments TLE2064CDRG4 Instrumentational OP Amps applications.
- Video data acquisition
- Power generator
- Portable media players
- Power transmission
- Power control
- Automatic control
- Home audio systems
- High speed sample
- Proportional operation circuits
- Exponential operation circuits
