TLE2064MDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2064 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-3.5/+-18/7/36V |
| Operating Supply Current | 1.25mA |
| Nominal Supply Current | 1.4mA |
| Slew Rate | 3.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1.8MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 19V |
| Voltage - Input Offset | 900μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Max I/O Voltage | 7mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.015μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2064MDG4 Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the J-FET-type. A Tube case is used for delivering the op amp. A total of 14 terminations have been reported in the past few weeks. Linear amplifier has a total of 14 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 14 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 7mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -55°C~125°C as far as operating temperature is concerned. Using an 1.25mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 93.06dB is the best course of action. There are a total of 4 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. TR is adopted to pack the instrumentation amplifier. Excalibur? corresponds to the op amp's series.
TLE2064MDG4 Features
14 Pins
supply voltage of 5V
93.06dB voltage gain
TLE2064MDG4 Applications
There are a lot of Texas Instruments TLE2064MDG4 Instrumentational OP Amps applications.
- Non-polarized electrodes
- Cinema or auditorium audio system
- Car stereo
- Oscilloscopes
- Medical instruments
- Portable media players
- Gaming industry
- Professional videography
- Signal amplification
- Industrial control system
