TLE2064MDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2064 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-3.5/+-18/7/36V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.25mA |
| Nominal Supply Current | 1.4mA |
| Slew Rate | 3.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 1.8MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 19V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Max I/O Voltage | 7mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.015μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2064MDR Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 900μV for input offset voltage. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -55°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 1.25mA. There should be no change in the voltage gain. On this instrumentation amplifier, there are 4 circuits that are connected together. The operating supply voltage of instrumentation amplifier is rated 18V voltage. An buffer amplifier is packed in a TR-shape according to the design. The Excalibur? indicates the series number of the op amp.
TLE2064MDR Features
14 Pins
supply voltage of 5V
93.06dB voltage gain
TLE2064MDR Applications
There are a lot of Texas Instruments TLE2064MDR Instrumentational OP Amps applications.
- Video data acquisition
- Strain gauges
- Radiation thermometry transducers
- Scintillation detectors
- Proportional operation circuits
- Image computer boards
- Comparator
- Video conversion and routing
- Video computer boards
- Fast A/D and D/A converters
