TLE2071AID

1 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 19V 4.5V~38V ±2.25V~19V TLE2071 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLE2071AID
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 609
Description: 1 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 19V 4.5V~38V ±2.25V~19V TLE2071 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	Excalibur™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIFET
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	TLE2071
Pin Count	8
Operating Supply Voltage	19V
Number of Channels	1
Operating Supply Current	1.7mA
Nominal Supply Current	2.2mA
Output Current	48mA
Slew Rate	45V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	70 dB
Current - Input Bias	20pA
Voltage - Supply, Single/Dual (±)	4.5V~38V ±2.25V~19V
Output Current per Channel	48mA
Input Offset Voltage (Vos)	2mV
Bandwidth	9.4MHz
Gain Bandwidth Product	10MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	10000 kHz
Voltage Gain	106dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	470μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Dual Supply Voltage	9V
Nominal Gain Bandwidth Product	9.4MHz
Max I/O Voltage	2mV
Power	NO
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES

TLE2071AID Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are J-FET types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . This op amp can operate from a supply current at 1.7mA. You should keep the voltage gain at 106dB for the time being. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 19V voltage. This buffer amplifier is assigned within the Excalibur? series by its manufacturer.