banner_page

TLE2071CP

1 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2071 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLE2071CP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 896
  • Description: 1 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2071 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Output Current 48mA
Max Supply Current 2.2mA
Slew Rate 45V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 70 dB
Current - Input Bias 20pA
Voltage - Supply, Single/Dual (±) 4.5V~38V ±2.25V~19V
Output Current per Channel 48mA
Input Offset Voltage (Vos) 4mV
Bandwidth 9.4MHz
Gain Bandwidth Product 10MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 10000 kHz
Voltage Gain 106dB
Average Bias Current-Max (IIB) 0.005μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 490μV
Low-Bias YES
Micropower NO
Programmable Power NO
Dual Supply Voltage 9V
Nominal Gain Bandwidth Product 9.4MHz
Max I/O Voltage 4mV
Power NO
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Series Excalibur™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIFET
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number TLE2071
Pin Count 8
Operating Supply Voltage 19V
Number of Channels 1
Operating Supply Current 1.7mA
Nominal Supply Current 2.2mA

TLE2071CP Overview


Op amp is packaged in 8-DIP (0.300, 7.62mm) case. A J-FET-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 4mV for this buffer op amp. Through Hole is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . An 1.7mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 106dB. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of instrumentation amplifier is rated 19V voltage. As the name implies, Excalibur? refers to the series of the buffer op amp.

TLE2071CP Features


8 Pins
supply voltage of 5V
106dB voltage gain

TLE2071CP Applications


There are a lot of Texas Instruments TLE2071CP Instrumentational OP Amps applications.

  • pH (acidity)
  • Weak signal detection
  • Proportional counter tubes
  • Broadcasting
  • Communication device
  • Navigation
  • Oscilloscopes
  • MP3
  • Subtraction operation circuits
  • Automotive sensors

Write a review

Note: HTML is not translated!
    Bad           Good