Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
Excalibur™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIFET |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLE2072 |
Pin Count |
8 |
Operating Supply Voltage |
19V |
Power Supplies |
+-5/+-15V |
Number of Channels |
2 |
Operating Supply Current |
3.1mA |
Nominal Supply Current |
3.9mA |
Output Current |
48mA |
Slew Rate |
45V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
20pA |
Voltage - Supply, Single/Dual (±) |
4.5V~38V ±2.25V~19V |
Output Current per Channel |
48mA |
Input Offset Voltage (Vos) |
3.5mV |
Bandwidth |
10MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
106dB |
Average Bias Current-Max (IIB) |
0.005μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
700μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.000175μA |
Programmable Power |
NO |
Dual Supply Voltage |
9V |
Nominal Gain Bandwidth Product |
9.4MHz |
Max I/O Voltage |
3.5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.0001μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLE2072ACP Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. Op amps are J-FET types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3.5mV. For this electronic part, it is recommended that you mount it with type Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. An 3.1mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 106dB. Instrumentation amplifier has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 19V voltage. Excalibur? is the number that corresponds to the series of the buffer op amp.
TLE2072ACP Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2072ACP Applications
There are a lot of Texas Instruments TLE2072ACP Instrumentational OP Amps applications.
- High input resistance broadband
- Multiplication circuits
- Test equipment
- Precision measurement
- Exponential operation circuits
- Automatic control
- RF cable systems
- Wireless base stations
- Portable docking station
- Power transmission