TLE2072AMJG
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Package / Case | CDIP |
| Surface Mount | NO |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Power Supplies | +-5/+-15V |
| Temperature Grade | MILITARY |
| Number of Channels | 2 |
| Supply Current-Max | 1.95mA |
| Slew Rate | 35 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 175pA |
| Input Offset Voltage (Vos) | 3.5mV |
| Gain Bandwidth Product | 9.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.06μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 19V |
| Low-Bias | YES |
| Micropower | NO |
| Min Dual Supply Voltage | 2.25V |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 3.5mV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 5.08mm |
| Length | 9.6mm |
| Width | 6.67mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLE2072AMJG Overview
The linear amplifier is packaged in a CDIP case. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. There is a Rail/Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. There is an input offset voltage of 3.5mV for this buffer op amp. 106dB should be the voltage gain. On the buffer amps, there are 2 channels that can be used. In order for op amp to function properly, the temperature should not be lower than -55°C degrees Celsius. No temperature greater than 125°C should be used. This electronic part should be conducted with a dual supply voltage of 19V volts for this part.
TLE2072AMJG Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2072AMJG Applications
There are a lot of Texas Instruments TLE2072AMJG Instrumentational OP Amps applications.
- Car stereo
- Industrial control system
- Automotive sensors
- Addition operation circuits
- Radar
- Division circuits
- Scintillation detectors
- Proportional counter tubes
- Comparator
- Television broadcasting equipment
