Parameters |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, Excalibur™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BIFET |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLE2072 |
Pin Count |
8 |
Operating Supply Voltage |
19V |
Number of Circuits |
2 |
Operating Supply Current |
3.1mA |
Nominal Supply Current |
1.8mA |
Output Current |
48mA |
Slew Rate |
45V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
20pA |
Voltage - Supply, Single/Dual (±) |
4.5V~38V ±2.25V~19V |
Output Current per Channel |
48mA |
Input Offset Voltage (Vos) |
700μV |
Bandwidth |
9.4MHz |
Gain Bandwidth Product |
10MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
106dB |
Average Bias Current-Max (IIB) |
0.000175μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.000175μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
9.4MHz |
Max I/O Voltage |
3.5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.0001μA |
Height |
1.75mm |
TLE2072AQDRG4Q1 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the J-FET type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 700μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using a supply current of 3.1mA , this buffer op amp will be able to operate. Voltage gain should remain at 106dB. On this instrumentation amplifier, there are 2 circuits that are connected together. The operating supply voltage of instrumentation amplifier is rated 19V voltage. To pack the operational amplifier ics, TR is adopted as the packing method. Automotive, AEC-Q100, Excalibur? is the number that corresponds to the series of the buffer op amp.
TLE2072AQDRG4Q1 Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2072AQDRG4Q1 Applications
There are a lot of Texas Instruments TLE2072AQDRG4Q1 Instrumentational OP Amps applications.
- Hand-held batteries
- Gaming industry
- Power control
- Car stereo
- High-frequency data acquisition systems
- Active probe
- Band-stop filter
- High input resistance broadband
- Mobile phone
- Micro signal measurement