TLE2072CP

2 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2072 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLE2072CP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 198
Description: 2 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2072 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Series	Excalibur™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIFET
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLE2072
Pin Count	8
Operating Supply Voltage	19V
Power Supplies	+-5/+-15V
Number of Channels	2
Operating Supply Current	3.1mA
Nominal Supply Current	3.9mA
Output Current	48mA
Slew Rate	45V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	70 dB
Current - Input Bias	20pA
Voltage - Supply, Single/Dual (±)	4.5V~38V ±2.25V~19V
Output Current per Channel	48mA
Input Offset Voltage (Vos)	6mV
Bandwidth	10MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	9400 kHz
Voltage Gain	106dB
Average Bias Current-Max (IIB)	0.005μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1.1mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000175μA
Programmable Power	NO
Dual Supply Voltage	9V
Nominal Gain Bandwidth Product	9.4MHz
Max I/O Voltage	6mV
Power	NO
Input Offset Current-Max (IIO)	0.0001μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLE2072CP Overview

The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. This is a J-FET type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 8 terminations. In total, there are 8 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 6mV. Through Hole is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using an 3.1mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 106dB. The op amp ic has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 19V. Excalibur? corresponds to linear amplifier's series.