TLE2074ACDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2074 |
| Pin Count | 16 |
| Operating Supply Voltage | 19V |
| Number of Elements | 4 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 7.5mA |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 9400 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 3mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2074ACDW Overview
Packaged in a 16-SOIC (0.295, 7.50mm Width) case, the buffer op amp is ready to use. Op amps are J-FET types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 16 terminations in the next few months. The total number of pins on linear amplifier is 16. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 16 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 3mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 6.5mA . Voltage gain should remain at 106dB. A total of 4 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 19V. This buffer amplifier is assigned within the Excalibur? series by its manufacturer.
TLE2074ACDW Features
16 Pins
supply voltage of 5V
106dB voltage gain
TLE2074ACDW Applications
There are a lot of Texas Instruments TLE2074ACDW Instrumentational OP Amps applications.
- PDA
- Power generator
- High/low-pass filter circuit
- Video data acquisition
- Professional videography
- Automatic control
- Portable electronic products powered by batteries
- Multimedia playback equipment
- MP3
- Multiplication circuits
