TLE2074AIN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLE2074 |
| Pin Count | 14 |
| Operating Supply Voltage | 19V |
| Number of Elements | 4 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 7.5mA |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 9400 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 3mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2074AIN Overview
Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. Op amps are J-FET types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. In recent months, the number of terminations has approached 14. In total, there are 14 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 14 pins. Regarding input offset voltage, buffer amplifier rates 3mV voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 6.5mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 106dB at all times. For the operating supply voltage of the op amp ic, there is a rating of 4. The operating supply voltage of the buffer op amp is rated at 19V. The Excalibur? stands for the buffer op amp's serial number.
TLE2074AIN Features
14 Pins
supply voltage of 5V
106dB voltage gain
TLE2074AIN Applications
There are a lot of Texas Instruments TLE2074AIN Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Weak signal detection
- High input resistance broadband
- Video data acquisition
- Automation control systems
- Medical imaging
- Video computer boards
- Vehicle electronics
- Band-stop filter
- Power transmission
