TLE2074CDWR
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2074 |
| Pin Count | 16 |
| Operating Supply Voltage | 19V |
| Number of Elements | 4 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 7.5mA |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.6mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
TLE2074CDWR Overview
In the package, you will find a 16-SOIC (0.295, 7.50mm Width)-case to contain the op amp ic. An op amp of this type is a J-FET-type. Instrumentation amplifier is delivered in a Cut Tape (CT) case. It is estimated that there will be 16 terminations in the next few months. In this case, there are 16 pins on the board. This linear amplifier should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 16 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . As long as the supply current of the chip does not exceed 6.5mA, this op amp ic can operate. Maintain 106dB as the voltage gain. For the operating supply voltage of the op amp ic, there is a rating of 4. The operating supply voltage of instrumentation amplifier is rated 19V voltage. A TR-shaped amplifier is used to pack the buffer amps. Buffer op amp series numbers are indicated by the Excalibur?.
TLE2074CDWR Features
16 Pins
supply voltage of 5V
106dB voltage gain
TLE2074CDWR Applications
There are a lot of Texas Instruments TLE2074CDWR Instrumentational OP Amps applications.
- Wireless base stations
- Instrumentation
- High gain DC amplifier
- Signal operation
- Medical instruments
- Exponential operation circuits
- Communication
- Television broadcasting equipment
- High-frequency data acquisition systems
- Television
