TLE2074CN

4 Channels 48mA per Channel 25pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2074 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLE2074CN
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 228
Description: 4 Channels 48mA per Channel 25pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2074 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	14
Operating Temperature	0°C~70°C
Packaging	Tube
Series	Excalibur™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIFET
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	5V
Base Part Number	TLE2074
Pin Count	14
Operating Supply Voltage	19V
Power Supplies	+-5/+-15V
Number of Channels	4
Operating Supply Current	6.5mA
Nominal Supply Current	7.5mA
Output Current	48mA
Slew Rate	45V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	70 dB
Current - Input Bias	25pA
Voltage - Supply, Single/Dual (±)	4.5V~38V ±2.25V~19V
Output Current per Channel	48mA
Input Offset Voltage (Vos)	5mV
Bandwidth	9.4MHz
Gain Bandwidth Product	10MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	10000 kHz
Voltage Gain	106dB
Average Bias Current-Max (IIB)	0.005μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1.6mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000175μA
Programmable Power	NO
Dual Supply Voltage	9V
Nominal Gain Bandwidth Product	9.4MHz
Max I/O Voltage	5mV
Power	NO
Input Offset Current-Max (IIO)	0.0001μA
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLE2074CN Overview

Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. This is a J-FET type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 14 pins on this chip. Regarding input offset voltage, op amp rates 5mV. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 6.5mA . It is a member of the 106dB's 106dB family. There are 4 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 19V. As the name implies, Excalibur? refers to the series of the buffer op amp.