TLE2081ACP
| Parameters | |
|---|---|
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 9400 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 470μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 3mV |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLE2081 |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Number of Elements | 1 |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 2.2mA |
| Power Dissipation | 1W |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
TLE2081ACP Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 3mV. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at 0°C~70°C. Operational amplifier can operate supply current at 1.7mA. 106dB should be the voltage gain. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 19V. The Excalibur? stands for the buffer op amp's serial number.
TLE2081ACP Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2081ACP Applications
There are a lot of Texas Instruments TLE2081ACP Instrumentational OP Amps applications.
- Test equipment
- Large motor controllers
- Non-polarized electrodes
- Active probe
- Video conversion and routing
- Division circuits
- Switching amplifier
- RF cable systems
- Scintillation detectors
- Biopotential
