TLE2081CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLE2081 |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Number of Channels | 1 |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 2.2mA |
| Power Dissipation | 725mW |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 9400 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 490μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 6mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2081CD Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. J-FET-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 8 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 6mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at 0°C~70°C. You can run this op amp ic on 1.7mA . 106dB should remain the voltage gain. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 19V voltage. Instrumentation amplifiers are numbered by their Excalibur? series.
TLE2081CD Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2081CD Applications
There are a lot of Texas Instruments TLE2081CD Instrumentational OP Amps applications.
- MP3
- Information processing
- High-frequency data acquisition systems
- Weighing systems
- Non-polarized electrodes
- Voltage regulation circuit
- single/dual op amp sum and difference circuits
- Strain gauges
- Weak signal detection
- Professional videography
