TLE2081CP

1 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2081 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLE2081CP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 620
Description: 1 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2081 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Series	Excalibur™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIFET
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	TLE2081
Pin Count	8
Operating Supply Voltage	19V
Number of Channels	1
Operating Supply Current	1.7mA
Nominal Supply Current	2.2mA
Power Dissipation	1W
Output Current	48mA
Slew Rate	45V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	70 dB
Current - Input Bias	20pA
Voltage - Supply, Single/Dual (±)	4.5V~38V ±2.25V~19V
Output Current per Channel	48mA
Input Offset Voltage (Vos)	6mV
Bandwidth	9.4MHz
Gain Bandwidth Product	10MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	9400 kHz
Voltage Gain	106dB
Average Bias Current-Max (IIB)	0.005μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	490μV
Low-Bias	YES
Micropower	NO
Max Frequency	1MHz
Programmable Power	NO
Nominal Gain Bandwidth Product	9.4MHz
Max I/O Voltage	6mV
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLE2081CP Overview

Op amp is packaged in 8-DIP (0.300, 7.62mm) case. The instrumentation amplifier in this picture is of the J-FET-type. A Tube case is used for delivering the op amp. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 6mV. This electrical part should be mounted using type Through Hole. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 1.7mA . The voltage gain should stay at 106dB. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 19V voltage. This buffer amplifier is assigned within the Excalibur? series by its manufacturer.