TLE2082ACD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLE2082 |
| Pin Count | 8 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3.1mA |
| Nominal Supply Current | 3.9mA |
| Power Dissipation | 725mW |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.000175μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 700μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 4mV |
| Input Offset Current-Max (IIO) | 0.00035μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2082ACD Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. This is a J-FET type op amp. A Tube case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. This op amp can operate from a supply current at 3.1mA. Keeping the voltage gain at 106dB is the best course of action. On the buffer amps, there are 2 channels that can be used. The Excalibur? indicates the series number of the op amp.
TLE2082ACD Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2082ACD Applications
There are a lot of Texas Instruments TLE2082ACD Instrumentational OP Amps applications.
- Power control
- PDA
- Fast A/D and D/A converters
- Cinema or auditorium audio system
- Test equipment
- Switching amplifier
- Signal amplification
- Biopotential
- Thermocouples
- Information processing
