TLE2082ACDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLE2082 |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Number of Elements | 2 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 3.1mA |
| Nominal Supply Current | 3.9mA |
| Power Dissipation | 725mW |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.000175μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 700μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 4mV |
| Input Offset Current-Max (IIO) | 0.00035μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2082ACDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a J-FET-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Operational amplifier can operate supply current at 3.1mA. Keeping the voltage gain at 106dB is the best course of action. There are 2 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 19V voltage. TR is adopted to pack the instrumentation amplifier. As the name implies, Excalibur? refers to the series of the buffer op amp.
TLE2082ACDR Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2082ACDR Applications
There are a lot of Texas Instruments TLE2082ACDR Instrumentational OP Amps applications.
- Signal transformation
- Differentiator circuits
- Active probe
- Video computer boards
- Measurements of Wheatstone bridge
- High-frequency data acquisition systems
- E-book readers
- Radiation thermometry transducers
- High/low-pass filter circuit
- Mobile phone
